O U R   P R O D U C T S
Our heat resistant cables are designed to maintain operation of critical fire alarm systems and emergency circuits against attack by fire and water.



  • RHW-2 POOWER CABLE - XW BreathSaver


    Ceramifiable Silicone Technology
    The hardening of a normal rubber insulation material into an insulating glasslike structure which protects the conductors against attack by fire and wire which may be present during fire fighting efforts.

    Primary Applications

    Fire Pumps

    A part of a fire sprinkler system's water supply and powered by electric, diesel or steam.

    Emergency Lighting Systems

    A battery-backed lighting device that switches on automatically when a building experiences a power outage.

    Emergency Ventilation Systems

    Affect the direction and velocity of the airflow and the air quantity in order to secure escape routes during fire emergency.

    Back-Up Power Systems

    Is an independent source of electrical power that supports important electrical systems on loss of normal power supply.

    Other applications that Lifeline MC Cables can be used: Tall Buildings, Emergency Feeder Cables, Stairwell Pressurization and Elevators / OEO.

    Commercial Applications

    • Health care facilities
    • High-rise/Commercial/Public Buildings
    • Educational Institutions/Dormitories
    • Auditoriums/Stadiums
    • Museums

    Infrastructure / Industrial Applications

    • Transit Tunnels
    • Transit Stations
    • Roadway Tunnels
    • OEM (Equipment and Pre-Fab)
    • Petrochemical - next generation Lifeline MC

    UL 2196 Standard & Test Methods

    Fire Endurance

    ASTM E119 (Standard Time vs. Temperature Cure) 2 Hours at 1010 Degrees Celsius

    Hose Stream Test

    The cable is not energized during the hose stream test. The cable goes through a Mechanical shock simulation. 2 1/2" hose stream test for feeder or branch circuit cables normally installed in conduit or metal sheaths.

    Energized Test

    After the test assembly has dried, each conductor is to be energized to the utilization voltage of the cable for a minimum of a 5 minute period.

    Here's a video explaining how Lifeline® MC Cable's are tested.